CQ-18T

Sends to an Output

Touch Sends to and select an output to show all send levels to that output on the fader for each input and FX channel. With an Output other than Main LR selected, the fader background is coloured to indicate that fader positions are showing the ‘Sends to’ an output that is not the Main LR.  The actual send level will depend on Pre/Post Fader settings for the selected output.  Only FX units in shared mode can be ‘Sent to’ MainLR, an Output or FX Unit .  Outputs cannot be sent to other Outputs, so their fader always controls their output level. When sending to a stereo output, pan controls are available, though if Follow Main LR Pan is On for the selected output, the pan value is only displayed and cannot be adjusted. The RHS fader is used to control the overall send, or output level. This is a duplicate of the output channel fader in the OUTPUTS bank view.

 109

User Guide V1.2 Issue 5