CQ-18T

MGrp/DCA

The MGrp/DCA bank tab is always accessible, even when the Custom Layer is active. It includes controls for all four Mute Groups and all four DCA’s (Digitally Controlled Amplifiers).  Assign channels to Mute Groups and DCA’s in the CONFIG / CONTROL & NETWORK / Mute Groups and CONFIG / CONTROL & NETWORK / DCAs screens. Mute Groups – All four Mute Group MUTE buttons in a single strip. When any member of the Mute Group is not muted, the button will show as Off (grey) and pressing it will mute all members. When all members are muted, it will show as On (red) and pressing it will unmute all members. DCA 1-4 – Use the DCA fader to adjust the main send level of all members of the DCA at once. The actual send level is calculated as the individual send level fader value, plus the DCA fader value. This is indicated with two arrows ( ▷◁ ) on the individual main send level fader of any channel in a DCA. Use the DCA MUTE buttons to mute or unmute all DCA members. When any member of the DCA is not muted, the button will show as Off (grey) and pressing it will mute all members. When all members are muted, it will show as On (red) and pressing it will unmute all members.

 111

User Guide V1.2 Issue 5