CQ-18T

OUTPUTS (Shared FX Units only)

The OUTPUTS tab displays the same information as the SENDS tab of an FX channel in the PROCESSING screen and controls where the wet FX signal is sent. Input to Main LR / Pan – Adjust the send level and stereo position of the selected channel to Main LR. This is also the fader shown in the bank tabs at the top of the PROCESSING and FADER screens, in bank view with the channel selected, and in the FADER screen when ‘ Sends to ’ is set to ‘ Main LR ’ . Input to FX – Adjust the send level from the channel to other shared FX units.  Sends to shared FX are Post Fader and are affected by the Input to Main LR fader level. Input to Outputs / Pan – Adjust the send level from the channel to Outputs. Pan appears when Outputs have been stereo linked and can be adjusted when Follow Main LR Pan is set ‘Off’ in the CONFIG / OUTPUTS screen.

 116

User Guide V1.2 Issue 5