CQ-18T

Default Network Settings On first boot or after a reset, network defaults are as follows: Enabled Network

CQ-12T – Ethernet CQ-18T – Ethernet

•

•

CQ-20B – WiFi Access Point

•

Wi-Fi settings (CQ-18T, CQ-20B)

• Security is set to ‘ OPEN ’ (no password is required to connect a device). • Password is blank and must be set. • Frequency is ‘ 2.4GHz ’. • Channel is set to ‘ AUTO ’. • SSID is ‘ Visible ’ . • SSID is [ CQ18T_ XXXX or CQ20B_ XXXX ] where XXXX are the last 4 digits of the serial number. Ethernet settings • The unit will be assigned an IP address by a DHCP server (e.g. a connected router), devices on the same network and in the same network range running CQ-MixPad can then connect to the unit. • If no address is provided, the CQ will automatically assign itself a local address. This allows for a direct connection to a computer using a network cable. • IP Mode is ‘ Automatic ’

Ethernet (if IP Mode is switched to Manual without making changes)

IP Address

192.168.1.62 192.168.1.254

•

Gateway

•

Subnet

24 (255.255.255.0)

•

 146

User Guide V1.2 Issue 5