CQ-18T

Important things to be aware of when using Quick Start:

• The current state of the CQ will be overwritten , so it’s good practice to store a Scene before recalling a Quick Start template. • Unlike a Scene, Quick Start can change stereo linking of inputs and outputs and EQ Type. This can mean that recalling Scenes after recalling a Quick Start template results in an unexpected setup. To correct an issue due to different configurations, reset stereo linking and EQ Types to the correct state and recall the Scene again. • Preamp Gain settings will be set to 0dB and all +48V Phantom Power will be turned off. Templates All Quick – All linkable channels set to mono. All mono and stereo inputs have the EasyEQ Quick Channel running (and flat) for simple, quick control of any input source type. All Complete – All linkable channels set to mono. All mono and stereo inputs have a Complete Channel recalled with all processing blocks fully reset. Conference - All linkable channels set to mono. First bank of inputs use Voice Quick Channels. All other mono and stereo inputs use EasyEQ Quick Channel (set flat).  Turn the Automatic Microphone Mixer On for each voice channel being used in the CONFIG / AMM screen. Rock* – Inputs set for Drums, Bass, Rhythm Guitar, Lead Guitar and Vocals, all using Quick Channels. Pop* - Inputs set for Drums, Bass, Guitar, Keys, Synth and Vocals, all using Quick Channels. Country* - Inputs set for Drums, Bass, Keys, Acoustic Guitar, Electric Guitar, Banjo, Fiddle, Harmonica and Vocals, all using Quick Channels. Jazz* – Inputs set for Drums, Bass, Piano, Guitar, Saxophone, Trumpet and Vocals, all using Quick Channels. *These templates vary depending on CQ model being used.

 28

User Guide V1.2 Issue 5