CQ-18T

Go to CONFIG / OUTPUTS and select the Output socket where Feedback Assistant ( FBA ) is needed. Settings will appear in the bottom half of the screen.

1.

2.

Set EQ Type to PEQ & FBA if it is not already.

3.

Go to PROCESSING / OUTPUTS .

Select the Output channel, then select the channel’s FBA to show details and controls.

4.

At the bottom left of the screen, select the DETECT tab (if not already selected)

5.

Set the filter Mode to Fixed . This will mean any detected feedback frequencies will have a fixed filter applied (which will remain until manually deleted). Disable HOLD to start detecting feedback frequencies; Enable HOLD to pause detection at any time Enable the RTA (Real Time Analyser) to show the frequency content of the selected Output on the graph.

6.

7.

8.

 46

User Guide V1.2 Issue 5