CQ-18T

Detect and add Live filters to an Output during a show or event

Follow the previous How To guide to add Fixed filters during setup whenever possible. This gives the best starting point for the FBA . Go to CONFIG / OUTPUTS and select the Output socket where Feedback Assistant ( FBA ) is needed. Settings will appear in the bottom half of the screen.

1.

2.

3.

Set EQ Type to PEQ & FBA if it is not already.

4.

Go to PROCESSING / OUTPUTS .

Select the Output channel, then select the channel’s FBA to show details and controls.

5.

At the bottom left of the screen, select the DETECT tab (if not already selected)

6.

Set the filter Mode to Live . This will mean any detected feedback frequencies will have a live filter applied, which will immediately begin to recover.

7.

Set the rate of recovery for all Live filters. This can be adjusted at any time to speed up or slow down (or even pause) recovery. It does not affect fixed filters.

8.

 48

User Guide V1.2 Issue 5