CQ-18T

Switch to the INPUTS tab at the top to display all channel sends to the selected FX Unit. Select and adjust individual send levels to the FX Unit from each channel. Note that these send levels are the same as can be viewed on each channel from the PROCESSING / SENDS screen. They can also be adjusted using faders from the FADER screen by using Sends to and selecting an FX Unit.

7.

8.

9.

Switch to the OUTPUTS tab.

Adjust send levels from the FX unit going to Main LR, other FX Units and Outputs 1-6 as required, so the FX is heard only where it should be.

10.

11.

Switch back to the CONTROL tab.

Adjust FX parameters. (Refer to the FX section of this guide for a detailed description and configuration of each FX). Also set Mute Mode: Trails On – Delays and reverbs decay naturally after muting. Trails Off – Delays and reverbs stop immediately when muted. Switch to the PEQ tab to adjust the tone of the affected sound if required.

12.

13.

 51

User Guide V1.2 Issue 5