CQ-18T

5. Arm each channel to be recorded using the Arm button below each channel meter. Armed channels are indicated with a red record symbol.

6. Ensure channels that are not be recorded show a grey record symbol, showing they are unarmed.

7. Use the Recording button in the transport bar to start recording to the SD card. A new folder will be created with empty files then recording will begin automatically. 8. Press the Stop button to finish the recording. When each recording is stopped, allow time for the recording to be finalised and the files stored correctly.

To Playback Multitrack audio from an SD Card

Go to CONFIG / Digital Audio (Symbols) / USB/SD to set up the connection.

1.

Select the Sample Rate . This should match the Sample Rate of recording.

2.

On the CQ, go to CONFIG / INPUTS and select the channels to use for playback. Use Multi Select to select multiple inputs at the same time. Recorded audio will play back to the channel it was recorded from.

3.

 60

User Guide V1.2 Issue 5