CQ-18T

Store and Recall settings The CQ has 1 Show on it at any time. Up to 100 Scenes can be stored within each Show along with up to 128 Library items. Using these three separate data types, it’s possible to store and recall anything from the settings of a PEQ on a single channel, to the entire setup of the CQ. For more information on different types of storage in CQ, see the Shows, Scenes and Libraries section.

Store a Scene

1.

Go to HOME / SCENES.

2. Select an available scene slot and use the Store New button to store the current state of the mixer as a Scene. Alternatively, select an existing Scene and use Overwrite to store the current state of the mixer in place of the selected Scene. 3.

Use Rename to change the name of the selected Scene.

4.

Recall a Scene

1.

Go to HOME / SCENES.

2. Select a Scene from the list and use the Recall button to replace the current state of the CQ (all processing, FX Units and send levels) with the stored version.  Note that any current settings will be

overwritten and this can’t be undone , so it is best practice to Store any changes before Recalling a Scene.

 62

User Guide V1.2 Issue 5