CQ-18T

Recall Processing Parameters Using Libraries

1. Go to PROCESSING , locate the bank of faders from the top of the screen containing the channel where the processing will be recalled to. 2. Select the channel, then stay in bank view to recall processing for a whole channel or select a processing block (e.g. Compressor) to view it in detail and recall only that part of the processing. 3. Open the Library from the top right-hand corner of the screen. A different library will open depending on the screen currently being viewed. 4. Switch between Factory and User Libraries to choose whether to view Library items in the mixer (Factory) or those stored by the User in the currently loaded Show. 5. Select an item from the list then use Recall to replace the current settings of the channel or processing block with the stored settings.

 Whole channel libraries can also be accessed from the CONFIG / INPUTS and CONFIG / OUTPUTS screens. From here a recall will also include settings from the config screen e.g. name and preamp gain.

 64

User Guide V1.2 Issue 5