CQ-18T

Store/Recall show files

 Show files can only be stored and recalled from/to a connected USB-A storage device which has been formatted correctly using the HOME / SYSTEM / USB/SD (Symbols) screen.

Connect a USB Drive to the USB-A port of the unit.

1.

2.

Go to HOME / DATA / SHOWS.

Use Store New to store the current state of the CQ along with all Scenes and Libraries to the inserted USB drive as a new Show. Select an existing Show and use Overwrite to replace the contents of the selected Show on the drive with the current state of the CQ along with all Scenes and Libraries.

3.

4.

Select Rename to change the name of the selected show file on the drive.

5.

Select Delete to remove the selected show file from the USB drive.

6.

Select a Show on the drive and use Recall to load all settings of the selected Show into the CQ.  Note that any current settings will

7.

be overwritten and this cannot be undone, so it is best practice to Store all current settings to a Show as a backup before Recalling another one.

 65

User Guide V1.2 Issue 5