CQ-18T

EQ Type – Select either Parametric EQ plus Feedback Assistant or a Graphic EQ for each output. Input Send Levels (Out 1-6 only) – Select whether send levels from the inputs are Pre Fader (independent of send levels to the Main LR output) or Post Fader (they ‘follow’ and are relative to the send levels of inputs to the Main LR output). Output Source Point – Choose the point where signal is sent, from input channels to the selected output. ‘Post EQ’ means that input channel compression will not be heard in the Output, this is commonly used for monitor speakers. ‘Post Comp’ means that input channel compression is heard in the Output and is often used for fill speakers, sub feeds, recording or streaming. Output Delay – Delay each output by up to 682ms. Often used to time align fill speakers or for synchronising audio to video. Headphone Output Source – Select Listen to have the headphone output work with the Listen buttons (with headphone symbol) on each channel. Set to a mono or stereo output to use as a monitor output with independent send levels to the Main LR.  If Listen is set, when no Listen button is pressed, the headphone output will be sourced from Main LR. Volume – Set the headphone output level.  Headphone level can also be controlled from the home screen. To access quickly on the CQ-12T or CQ-18T, press the HOME screen key once or twice to display and adjust. The CQ-18T has two headphone outputs which can be set up individually. For example, it is possible to have one headphone output set to Listen and the other to be fed with one of the monitor mixes. Alt Out (CQ-20B) The Alt Out provides an alternative balanced TRS output connection. Source – Select any other Output or route the Listen out.  If Listen is set, when no Listen button is pressed, the Alt Out will be sourced from Main LR.  Listen is sent to the Alt Out at full volume for use with IEM systems that have input level control. For adjustable level, the headphone output should be used.

 69

User Guide V1.2 Issue 5