Covetrus CH - Veterinary Instrumentation

Dental Equipment & Instrumentation 15 Internal Fixation 3

Tel 0845 130 9596 info@vetinst.com Tel +44 114 258 8530 info@vetinst.com

Shaft Screws 4.5mm Shaft Screws for HIF

Titanium Mesh System

We offer a range of 4.5mm shaft screws specifically designed to be used as trans-condylar stabilising screws. Note that the 4.5mm shaft screws are significantly stronger than a standard 4.5mm cortical screw.

SHSC4532 SHSC4534 SHSC4536 SHSC4538 SHSC4540 SHSC4542 SHSC4544

Shaft Screw Shaft Screw Shaft Screw Shaft Screw Shaft Screw Shaft Screw Shaft Screw

32mm 34mm 36mm 38mm 40mm 42mm 44mm

Based on a human product, our Titanium Mesh is cuttable and is mouldable in three-dimensions, making it very adaptable and ideal for cranial fractures and in the management of fractures of other flat bones that are not load bearing. The mesh has also been used to augment bone cement in joint replacement surgery. The screws are tapered, making them self-drilling and self-tapping, however, a drill of 1mm diameter or less may be used to start the screws and may help reduce the chances of cracks forming if used close to the fracture lines. The screws are made of titanium to avoid any problems arising from mixed metallurgy and feature a low profile cruciate head designed for use with the cruciate screwdriver with AO quick release fitting. A 5mm or 7mm length appears to be the most useful for our species.

Please note that a tap is required for the shaft screws. It is also recommended that an insert sleeve is used to centre the pilot hole in the far condyle.

COU4565QR COU4565T-A DRILLSTOP

Quick Release Countersink For 4.5mm/6.5mm Screws AO Fit

T Bar Countersink For 4.5mm/6.5mm Screws

Drill Stop Set In Stainless Case

SDH4500 H090105S S090105S H090108S S090108S TS00045 ADJDG45

Hex Screwdriver For 4.5mm/5.5mm/6.5mm Screws 3.2mm (Pilot) Drill Round Shank 3.2mm (Pilot) Drill AO Quick Release 4.5mm (Clearance) Drill Round Shank 4.5mm (Clearance) Drill AO Quick Release 4.5mm Cortical Tap Quick Release - Handle Required

Adjustable Drill Guide for 4.5mm Drills

SL4532

Insert Sleeve 4.5x3.2mm

TIMESH405006 TIMESH506006 TIMESH607006

Titanium Mesh 40mm x 50mm 0.6mm Thick Titanium Mesh 50mm x 60mm 0.6mm Thick

Cortical Nuts

Titanium Mesh 60mm x 70mm 0.6mm Thick TIMESHSCREW2005 Titanium Mesh Screws Tapered 2.0mm x 5.0mm Length Cruciate Head TIMESHSCREW2007 Titanium Mesh Screws Tapered 2.0mm x 7.0mm Length Cruciate Head TIMESHSDI Screwdriver Insert for 2mm Cruciate Titanium Mesh Screws. AO Quick Release

N45

4.5mm Cortical Nut Stainless Steel Non Sterile 4.5mm Cortical Nut UHMPWE - Sterile

CN45-A

Condyle Clamp

TIMESHCUT TIMESHPLI

Titanium Mesh Cutters

Titanium Mesh Contouring Pliers

001080

Condyle Clamp Stainless Steel

107