Covetrus CH - Veterinary Instrumentation

Dental Equipment & Instrumentation 15 Surgical Power Tools 5

Tel 0845 130 9596 info@vetinst.com Tel +44 114 258 8530 info@vetinst.com

K220 Blades

K109 Large 6.25mm Jacobs Chuck

CUT THICKNESS

LENGTH 30.0mm 30.0mm 27.4mm 27.4mm 42.7mm 42.7mm 42.7mm

WIDTH 6.4mm 10.2mm 19.0mm 14.0mm 19.1mm 9.5mm 14.0mm

K142 K144 K146 K147 K149 K154 K155

1.0mm 1.0mm 0.65mm 0.65mm 0.65mm 0.65mm 0.65mm

The 6.25mm chuck attachment is cannulated for driving long pins.

K109VI

K109 6.25mm Chuck Attachment Including Key

K210 HiTorque Large 6.25mm Jacobs Chuck

K220 Mark II Sagittal Saw

The Mark II Saw is more robust in construction than the K120 Saw. Blade attachment is by use of a Hex Wrench.While this gave a more rigid attachment of the blade to the saw it was also the weak point of the attachment. We have re-engineered the blade holding mechanism to make it stronger and made the whole attachment from stainless steel. The Mark II Saw drives a larger range of blades including longer ones up to 42mm useful in the TTO and TTA procedures.

Using the standard chucks the MiniDriver has a torque of 0.78 Newton Meters, which makes heavy weather of driving large pins without pre drilling. By adding a set of gears the chuck speed is reduced but the stall torque is increased to 2.8 Newton Meters ideal for driving pins.

K210VI

K210 Hi Torque 6.25mm Chuck Attachment

K220VI K201VI

K220 Mark II Sagittal Saw Attachment Replacement Wrench For K220VI

K107VI Keyless Chuck Attachment

K120 Blades

Chuck keys wear quickly, become lost and can be awkward to use in some situations.The keyless chuck allows the surgeon to quickly switch drills and pins without a key. The distal part of the chuck is held using fingers and the chuck opened or closed by engaging the drill in either the forward or reverse drive respectively.The downside is that the chuck is slightly bulkier than the keyed equivalent.

CUT THICKNESS

LENGTH 15.1mm 31.0mm 15.1mm 31.0mm 15.1mm

WIDTH 10.4mm 10.4mm 16.5mm 6.4mm 10.4mm

K123 K124 K125 K132 K133

1.0mm 1.0mm 1.0mm 0.7mm 0.7mm

K107VI

Keyless Chuck Attachment 0 - 6.3mm

K114B AO Quick Release Attachment

MiniDriver Hose The standard hose is a 3m long double hose which vents back at the wall gas outlet or the regulator. In the UK the standard drive gas is bottle sterile medical air delivered at 7bar (100psi). Elsewhere in the world nitrogen may be used. The standard hose supplied is fitted with an MA7 gas probe (medical air at 7bar) which prevents connection to other gases e.g. oxygen.

Drills may be changed quickly without the use of a chuck key.The original version was made from relatively soft aluminium.The re-manufactured K114B is made from stainless steel and is easier to use than the original.

3MHOSEVI

MiniDriver Hose

3MHOSEVIUS

MiniDriver Hose US Schrader

K114BVI

K114B AO Quick Release Attachment

157