Covetrus CH - Veterinary Instrumentation

15 Dental Equipment & Instrumentation 2 Joint Surgery

www.vetinst.com www.veterinary-instrumentation.co.uk

TPLO Rotation Chart

Plate Holding/Drill Guide Forceps

Temporary fixation of the head of TPLO plates aids in positioning, while screws are placed.The spherical ball tip of these forceps seats well in the round holes of the plate, as well as in conventional DCP holes, whilst allowing drilling through the hole.Also very useful for plate osteosynthesis in fracture repair.

The rotation data for blades 12mm, 15mm, 18mm, 21mm, 24mm, 27mm, 30mm and 34mm are displayed on this double sided, laser marked, stainless steel gauge. Also incorporates a drill gauge and a ruler for measuring screws and rotation.

001225 001226 001227

1.5mm/2.0mm Plate Holding/Drill Guide Forceps 140mm Long 2.4mm/2.7mm Plate Holding/Drill Guide Forceps 145mm Long 3.5mm Plate Holding/Drill Guide Forceps 150mm Long Plate Holding & Drill Guide Forceps Set of 3 (As above)

TPLOROT

TPLO Rotation Chart

0012SET

Wedge Osteotomy Gauge Set 9˚To 30˚

Very Large Fragment Forceps

Wedge gauges simplify the marking and cutting of the appropriate wedge. Using the parallel marking allows the surgeon to mark and cut a wedge with equal length borders, creating a better closure.

Use where a wide gape is required or where the instrument needs to be further out of the surgical field. Spinlock version is very useful during CrCl surgery for repositioning the stifle prior to placement of a lateral suture, or holding osteotomies during closing wedge type procedures.

001493

Wedge Osteotomy Gauge Set

001202 001203

Very Large Fragment Forceps 205mm Long

TPLO Reduction Forceps With Wire Guide

Very Large Fragment Forceps With Spinlock 215mm Long Very Large Fragment Forceps With Spinlock Left Handed

001203-L

Extra Long Bending Levers

TPLO reduction forceps are designed to stabilise and compress across the osteotomy site.At the tip is a wire guide tube which allows a stabilising wire to be driven across the osteotomy at exactly the correct position without skidding or slippage at start up.The spin-lock allows full flexibility on positioning and compression.Available with the wire guide positioned on left or right side.

Longer plate benders (240mm) with 4mm and 6mm slots are designed with TPLO plates in mind to make bending and twisting much easier.

001288L

3.5mm/4.5mm Extra Long Bending Levers 240mm Long

TPLORFR TPLORFL

TPLO Reduction Forceps With Wire Guide Right

TPLO Reduction Forceps With Wire Guide Left TPLORFSET TPLO Reduction Forceps With Wire Guide Set (As above)

38