Covetrus CH - Veterinary Instrumentation

15 Dental Equipment & Instrumentation 2 Joint Surgery

www.vetinst.com www.veterinary-instrumentation.co.uk

TTA Instrumentation

TTA Cuttable Cage Cutters

TTA cage cutters, which have narrow jaws designed to fit between the fins of cuttable cages.These cutters are only for TTA cages – not suitable for other implants due to the specially designed slim jaws.

TTACACUT

TTA Cuttable Cage Cutter

The TTA procedure does require some essential instruments. Positioning of the fork and cage is impossible without the following instruments.

TTA Mallet

TTA554 TTA555 TTA666 TTA444 TTA333 TTA777 TTAPFO TTATAN DG242735

TTA Drill Guide (4 Hole) TTA Drill Guide (8 Hole)

TTA Fork Holder

TTA Spreader & 3mm, 6mm, 9mm, 12mm & 15mm Inserts

TTA Plate Bender

1.9mm Pins (Set of Two) TTA Plate & Fork Overlay

The TTA Fork needs to be gently tapped home for maximum stability.The 140 gram Mallet is the ideal weight.

Common Tangent TTA/MMT Advancement Overlay

Depth Gauge for 2.4/ 2.7 /3.5mm Screws

001323

Mallet 140g 155mm Long

TTA Cage Forceps

TTA Spinlock Reduction Forceps

Increasing repair stability and reducing healing times can be achieved by compression of the distal tibial tubercle to the tibial shaft. The spinlock reduction forceps are the right size and have the correct degree of spread for most TTA procedures.

Manipulating the TTA cage into the correct position can be an awkward part of the procedure, particularly the smaller sizes. The TTA cage forceps grasp the cage firmly along the spine allowing it to be extracted from the case and placed into the tibial crest osteotomy.

001245SL

TTA Spinlock Reduction Forceps 180mm

TTAFCP

TTA Cage Forceps

TTA Saw Guide

Forkless Plate Forceps

The TTA saw guide is useful where the surgeon would prefer to use a guide which can be positioned correctly to maintain the position and plane of the cut, allowing concentration on the saw. Secured in place with standard fragment forceps, the guide is removed for the final freehand curve at the distal end of the osteotomy. Suitable for both right and left leg.

Holds the plate in position allowing the pilot hole to be drilled through the guide in the correct position, even after the osteotomy has been made.

TTAXFCP

TTA999

Forkless TTA Plate Forceps (145mm)

TTA Saw Guide

44