Covetrus CH - Veterinary Instrumentation

Dental Equipment & Instrumentation 15 Internal Fixation 3

Tel 0845 130 9596 info@vetinst.com Tel +44 114 258 8530 info@vetinst.com

1.0mm implants currently available consist of a range of straight plates, cuttable plates and an extensive range of T-Plates for radial fractures. 1.0mm Plates

1.0mm Cortical SelfTapping Screws

Ø2

Length

1.0mm Compression Plates

Ø1

Use 0.7mm pilot drill and 1.0mm cruciate screwdriver.The threads on the screws are very fine. Caution must be exercised at the final tightening.

C100210 C100418 C100522 C100626 C100730 C100834 C100938 C101042

1mm Dynamic Compression Plate 10mm 2 Hole 1mm Dynamic Compression Plate 18mm 4 Hole 1mm Dynamic Compression Plate 22mm 5 Hole 1mm Dynamic Compression Plate 26mm 6 Hole 1mm Dynamic Compression Plate 30mm 7 Hole 1mm Dynamic Compression Plate 34mm 8 Hole 1mm Dynamic Compression Plate 38mm 9 Hole 1mm Dynamic Compression Plate 42mm 10 Hole

CSST1004 CSST1005 CSST1006 CSST1007 CSST1008 CSST1009 CSST1010 CSST1011 CSST1012 CSST1013 CSST1014 CSST1015

1mm Self Tapping Screw 4mm 1mm Self Tapping Screw 5mm 1mm Self Tapping Screw 6mm 1mm Self Tapping Screw 7mm 1mm Self Tapping Screw 8mm 1mm Self Tapping Screw 9mm 1mm Self Tapping Screw 10mm 1mm Self Tapping Screw 11mm 1mm Self Tapping Screw 12mm 1mm Self Tapping Screw 13mm 1mm Self Tapping Screw 14mm 1mm Self Tapping Screw 15mm

1.0mm Cuttable Plates

Screwdriver Insert

The Vi range of cuttable 1.0mm plates gives flexibility of management options for a number of different fracture scenarios.All of our 1.0mm Cuttable Plates have round holes. Use the dedicated compound action implant cutters (001230) to cut plates.

SDIN1.0-A

Dental Fit Screw Driver Insert For 1mm Screws

Drill Guide 0.7/1.0mm

CP10390 CP10491 CM10390

Cuttable Plate 1.0mm 30 Holes 90mm Long Cuttable Plate 1.0mm 23 Holes 91mm Long

Cuttable Malleable Plate 1.0mm 30 Holes 90mm Long

1.0mm Cuttable Plates With Spaces

Due to the size limitations, this device serves only as a drill guide and cannot be used as an insert sleeve or tap guide.

CDTIS10

Drill Guide 0.7mm/1.0mm

1.0mm cuttable plate with spaces to give the surgeon additional options. Versions are available with either 3mm or 4mm hole spacing.

1.0mm Plate Holding Forceps

CP1039027 Cuttable Plate 1.0mm 27 Holes 90 mm 3mm Spaces CP1049120 Cuttable Plate 1.0mm 20 Holes 91mm 4mm Spaces

1.0mm T-Plates

Use to hold a plate in position on the bone.

C1PHF

1.0mm Plate Holding Forceps

The 1.0mm T-Plates have been designed by Vi to provide options for the repair of distal radial fractures in very small dogs and in cats.These fractures can be difficult to manage, partly because of the small sizes of the bones involved and partly because the area has relatively poor vascularity resulting in what is often a prolonged healing time.

Mini Quick Release Drill Bits - Dental Fit These smaller drill bits are too delicate for use with a power drill, and are designed for use with the D17-080 dental fit handle.This improves control and helps prevent breakages.

T101016 T101018 T101020 T101021 T101022 T101024 T101026 T101027

1mm T Plate 16mm 5 Hole 1mm T Plate 18mm 5 Hole 1mm T Plate 20mm 6 Hole 1mm T Plate 21mm 6 Hole 1mm T Plate 22mm 6 Hole 1mm T Plate 24mm 7 Hole 1mm T Plate 26mm 7 Hole 1mm T Plate 27mm 7 Hole

10MDB07-A 10MDB10-A

0.7mm Drill Bit For D17-080 Quick Release Handle Dental Fit 1.0mm Drill Bit For D17-080 Quick Release Handle Dental Fit

For scaled plate profiles, please view the Plate Profile chapter.

87