MaestroDMX

4. Click the channels 3-dot menu button to, then edit the channel. Depending on the type of Attribute assigned to the channel different Attribute Properties will be displayed.

For Static channel types (STATIC, MASTER DIMMER, SHUTTER etc) you can define the static: ● Value

For all Dynamic types: PAN, TILT, ZOOM, ACTIVITY, LED Color Control etc you can define the following Attribute Properties: ● Smoothing: This will add smoothing to the channel, which will, for example, make the lights change color more slowly and fade from one color to the next if it is a color channel. ● Output Range : Limits the range in which this channel can operate. ● Invert Value: This will invert the channel data eg 1-255 will be 255-1 ○ Note: Maestro will add mirroring and symmetry automatically, you likely will not need to invert at the attribute level (such as pan/tilts on movers). Uniquely to PAN and TILT types you can define the following Attribute Properties: ● Offset: Only available for PAN and TILT channel types, the offset defines the pan or tilt center point ● Width: Only available for PAN and TILT channel types, the width defines the pan or tilt range For Effect button control types: ● ON: Only available for FOG and EFFECT channel types. When triggered via the SHOW page’s Trigger Button, the ON value will be set ● OFF: Only available for FOG and EFFECT channel types. When triggered via the SHOW page’s Trigger Button, the OFF value will be set