RCF RDNet Control 2

RDNet 4.0 User Manual Rev. A

9.2

PLAYERS

As soon as the audio setting of the player are set, the player/s appear. In this example we are using 2 players with Dante Virtual Sound Card Asio. The reference signal is Ch 5 and the player are respectively on channel 1 and 2.

1.

Player Setting

2.

Player reset to default

3.

Play

4.

Delay Finder

5.

Current delay

1.

To change the player input channel.

2. The player will return at its default setting, without any input assigned. 3. Play/Pause button allows to Show/Hide the measurement plots. 4. Delay Finder open the delay finder utility which allow automatically to find and apply the delta delay between the reference and player channel. Mandatory to align the two signals for comparison. As soon as the delay is found, click on to insert it in the measurement chain.

5. Here it is shown the delay applied, in milliseconds and meters.

If the delay is not applied between reference and player channel, the Live IR and Phase plots will be not calculated and consequently they will not be displayed correctly.

62