RCF RDNet Control 2

RDNet 4.0 User Manual Rev. A

10. SPECIAL FUNCTIONS AND UTILITIES

This chapter is about the software special functions and utilities.

10.1

AUTOTEST

The Autotest allows the proper operation of each way of selected RDNet devices to be checked. Before using this function, it is necessary to be in online mode. Select the objects to be checked and activate this function from the menu < Advanced> → < Autotest> , then a device list is shown. After clicking Continue , devices will be muted.

Now, after sending an audio signal (as reference, e.g. pink noise), it is possible to listen to (as solo) each single way of selected devices. At the end, the initial mute state will be restored and the software will return to the workspace home page. This function is useful when wiring the system, as it helps easily find malfunctions / wrong wiring and solves issues (before suspending speakers). If ' Single Way ' is selected, the pink noise will be sent to each way of each single device (when selected). If ' Full Module ' is selected, the pink noise will be simultaneously sent to all ways of each selected device.

10.2

FIRMWARE UPGRADE

CONTROL 8 and CONTROL 2 upgrade

The CONTROL 8 and CONTROL 2 firmware upgrade can be started from the menu < Advanced> → →

Click Load to proceed, select the right file (the firmware to be loaded) and follow all instructions.

The CONTROL 8 firmware upgrade can be made via USB only.

68