eurolite DMX Move Control 512 Pro

Lighting Control

7 LIGHTING CONTROL Switch on the controller with the rear power switch. The unit is in manual mode and the display indicates “ Manual ” in the upper line.

7.1 Adjusting a Scene A scene contains the values of all control channels including the pan and tilt settings of the connected spotlights.

6

● The motor faders always indicate the current setting for the fixture selected. When several fixtures are selected with different settings, the faders indicate the settings of the fixture selected last. If the movement control with the encoder wheels does not work, probably the PAN/TILT button is engaged (SPEED LED lights). Then the encoder wheels control the effect parameters. 4 The DMX channels are combined in 2 groups (pages) of 8 channels each. If necessary, use the PAGE UP and PAGE DOWN button to switch between the channels groups and repeat the steps until the desired values are assigned to all channels. The control LEDs above the buttons indicate which channel group is selected. Color mixtures via the HSV function can be entered by pressing the PGM DOWN/HSV button for 3 seconds (LED lights). Then set the desired values with the 6/H , 7/S and 8/V fader. To delete all DMX values adjusted keep the CLEAR button pressed for 3 seconds. To confirm the deleting procedure, all LEDs of the controller flash three times. 5 6

1

Use the FIXTURE buttons at the lower left to select the fixtures to be controlled. The buttons light. If a button is pressed once again, the corresponding fixture is deselected. ● Instead of selecting each fixture individually, units with consecutive numbers can be selected simultaneously. For this, press the first and last number button simultaneously. EXAMPLE For selecting the devices 1 to 4 press the FIXTURE buttons 1 and 4 simultaneously. Thus, all 4 devices will be selected simultaneously. In the same way, it is possible to deselect devices again. The 24 fixtures are split into 3 pages. If necessary, use the PAGE button to switch between the pages. The LEDs A , B and C indicate which page is selected. Adjust the desired DMX values for the DMX channels using the motor faders and, if necessary, the PAN and TILT wheels. ● As soon as a fader is moved, the display indicates the number of the control channel in the lower line and the current output value as a DMX value (0 255).

2

3

50

www.eurolite.de