eurolite DMX Move Control 512 Pro

System Settings

11.7 Data import [Data load] 1 Connect a USB memory device to the controller’s USB port. ● The files to be imported must be stored in the folder “DMX MOVE CONTROLLER 512 PRO“ located on the root directory of the USB memory device. 2 Call the menu item [ Data load ]. ● The display indicates “Press number key Select file“ (select file with number button). ● The LED of a number button lights, when data is available on the USB memory device for this memory bank. 3 Select the file to be loaded with the number buttons at the lower right corner. ● The display indicates a progress bar. 4 After successful completion of the data import, the device returns to the main menu level. Repeat the steps 2 and 3 to import further files. 11.8 Blackout Function [Black-out mode] It is possible to define whether all control channels react on the button BLACKOUT or only the dimmer control channel. 1 Call the menu item [ Black-out ]. 2 Use the PAN wheel to choose between the settings [ All channels ] and [ Only dimmer ]. ● All channels: All control channels react on the button (i.e. in the blackout state the control channels have the value zero). ● Only dimmer: Only the dimmer control channel reacts on the BLACKOUT button (i.e. in the blackout state the control channel has the value zero). 3 Confirm your setting with ENTER . ● The display shortly indicates “SAVE OK“ and returns to the main menu level.

11.9 Fog Machine [Fog machine control] The controller can operate a DMX fog machine. This menu allows adjusting the machine. 1 Call the menu item [ Fog machine control ]. 2 Use the PAN wheel to choose between the settings Auto FOG [ OFF ] and Auto FOG [ ON ]. ● Auto FOG [ OFF ]: By pressing the DMX FOG MACHINE button, the fog machine is activated. ● Auto FOG [ ON ]: The fog machine is activated by the built-in timer. The time intervals and duration are adjustable. 3 Press the SWAP button to adjust the timer functions. 4 Use the PAN and TILT wheel to adjust the duration and the time intervals (i.e. the time between the individual fog outputs) between 1 and 600 seconds. EXAMPLE If the fog machine is supposed to emit fog for 3 seconds every 60 seconds, adjust the [ ON TIME ] to 3 seconds and the [ OFF TIME ] to 60 seconds. For a hazer, which is supposed to emit fog continuously, adjust an [ ON TIME ] of 600 seconds and an [ OFF TIME ] of 1 second. Press the SWAP button. Then use the PAN wheel to enter the DMX address for the fog machine’s first control channel and the TILT wheel to enter the DMX value. Press the SWAP button once again to set up a second control channel. Confirm your settings with ENTER . ● To confirm the memory procedure, all LEDs of the controller flash three times. 8 After completing the settings, press ESC to return to the main menu level. 5 6 7

61

www.eurolite.de