Covetrus CH - Veterinary Instrumentation

15 Dental Equipment & Instrumentation 3 Internal Fixation

www.vetinst.com www.veterinary-instrumentation.co.uk

Drill Guide 0.7/1.0mm

Triple Drill Guides

Due to the size limitations, this device serves only as a drill guide and cannot be used as an insert sleeve or tap guide.

CDTIS10

Drill Guide 0.7mm/1.0mm

Adjustable Drill Guide

Triple Drill Guides are used to accurately position drills and K or arthrodesis wires.The three holes in the head allow for the placement of parallel anti-rotation wires.

SLG1115 SLG0020 SLG0025

Double Drill Guide/Sleeve For 1.1mm & 1.5mm Drills 100mm

Triple Drill Guide/Sleeve For 2.0mm Drills 115mm Triple Drill Guide/Sleeve For 2.5mm Drills 115mm

Combination Drill, Tap & Insert Sleeve

Our Adjustable Drill Guide allows accurate placement of drill holes by predetermination of drill entry and exit points. Locks onto bone to minimise errors. • The swivelling point allows use of the guide where access is limited • Supplied with 2.0, 2.5 and 3.5 Drill Sleeves. Use the appropriate sleeve for the drill in use • A scale on the instrument measures hole depth • Applications include condyle fractures, femoral neck tunnels, screw holes, and ununited anconeal process In our view this design has significant advantages over CEG and C guides ADJDG2035 Adjustable Drill Guide For 2.0mm/2.5mm/3.5mm Drills 175mm KWG10 K-wire Guide For ADJDG2035 ADJDG45 Adjustable Drill Guide 4.5mm Drills 190mm

The large end has an internal diameter which matches the clearance drill and tap.The small end has an internal diameter the same as the pilot drill and an external diameter which fits the clearance drill hole, i.e. the same as an insert sleeve.This single instrument contains all the guides and sleeves you need to place a lag screw.

CDTIS20 CDTIS24 CDTIS27 CDTIS35 CDTIS45

Combination Drill, Tap & Insert Sleeve for 2.0 Screws 100mm Combination Drill, Tap & Insert Sleeve for 2.4 Screws 105mm Combination Drill, Tap & Insert Sleeve for 2.7 Screws 110mm Combination Drill, Tap & Insert Sleeve for 3.5 Screws 115mm Combination Drill, Tap & Insert Sleeve for 4.5 Screws 130mm

C Drill Guide

Use of an appropriately sized drill guide enables the surgeon to control exactly the entry and exit points of drills.This ability is extremely important in lag screwing. Various insert sleeves are available for each drill size, with an accurate guidance system, and provide exact positioning of holes for lag screwing, (e.g. for a 3.5mm cortical screw, drill 3.5 lag hole in proximal cortex, insert SL3525 and drill through it into the trans cortex. Finally tap and insert screw).

CEG2735

Small Drill Guide i/d 3.5mm ‘C’ Guide 135mm

132