Covetrus CH - Veterinary Instrumentation

Dental Equipment & Instrumentation 15 Internal Fixation 3

Tel 0845 130 9596 info@vetinst.com Tel +44 114 258 8530 info@vetinst.com

Depth Gauges

Bone Plate Contouring Bone Plate Bending Levers

Bone plates appropriate for the repair of load bearing long bones are very stiff.Accurate contouring of plates is essential for precise fracture reduction; however, marking of plates during the bending process will lead to reduced fatigue strength. Contoured plates should be placed with adequate support to minimise cyclical loading. Extra length benders 01288L are particularly useful for contouring larger TPLO plates along with 3.5mm and 4.5mm standard plates. Bone plate benders used in pairs are the most economic method of plate contouring. Supplied in pairs.

Accurate measurement of hole depth is essential in order to select the appropriate screw size. A range of gauges are available for various screw sizes. Hole depth is read from the instrument.Add extra to the measured length to ensure maximal screw thread/bone interface engagement. Chart supplied with depth gauge or available on request. Use in self-tapping or cortical systems.

001280 001286 001285 001287 001288 001288L

1.0mm Bending Levers 130mm Long

DG2027

Depth Gauge For 2.0mm & 2.7mm Screws 135mm Depth Gauge For 2.4mm, 2.7mm & 3.5mm Screws 180mm (TTA only) Depth Gauge For 2.7mm & 3.5mm Screws 175mm Depth Gauge For 4.5mm & 6.5mm Screws 290mm

AO Type 1.5mm/2.0mm Bending Levers 130mm Long AO Type 2.4mm Bending Levers 140mm Long AO Type 2.7mm/3.5mm Bending Levers 175mm Long AO Type 3.5mm/4.5mm Broad Bending Levers 200mm Long

DG242735

DG2735 DG4565

3.5/4.5 Extra Long Bending Levers 240mm Long

Premium Depth Gauge

DeltaTPLO Plate Benders With Curved Slots

Radius matches screw under-head to replicate screw position. Improved hook. Contoured comfortable grip for ease of use. Store in fully retracted state to protect the delicate probe section.

Plate benders with slots tend to distort the Delta plate. The curved slots help grip and support the plate during the bending process. In addition the plate is much less likely to end up on the floor.

DGP15

Premium Depth Gauge For 1.5mm Screws Premium Depth Gauge For 2.0/2.4mm Screws Premium Depth Gauge For 2.7/3.5mm Screws

TPLODELBEND Delta TPLO Plate Benders (Pair) 230mm Long

DGP2024 DGP2735

133