Covetrus CH - Veterinary Instrumentation

15 Dental Equipment & Instrumentation 1 General Orthopaedics

www.vetinst.com www.veterinary-instrumentation.co.uk

K/A Wire/Small Pin Punch

Offset K/A Wire Punch For Bent Pins

The cut ends of K wires, arthrodesis wires and small pins used for fragment fixation e.g. distal femoral fractures, should be buried beneath the bone or articular surface to minimise soft tissue irritation.The tip of the punch is concave to locate onto the pin end.The other end is struck with a mallet.

The bigger, angled foot of this punch is designed to allow bent-over arthrodesis or K wires to be driven home onto the bone surface. May also be used for Rush pins.

001360 001361

K/A Wire & Small Pin Punch 135mm Long

K/A Wire & Very Small Pin Punch 1.6mm Tip 135mm Long

001364

Offset K/A Wire Punch For Bent Pins 135mm Long

IM Pin Punch

Orthopaedic Hard Back Saw

IM Pin Punch with a larger diameter tip for driving larger pins.

001374

IM Pin Punch 6mm Tip 135mm Long

Made from stainless steel.The stiff back helps to guide the saw.

Stubby Punch

001004

Orthopaedic Hard Back Saw

Adjustable Bone Saw

The reduced working length allows the stubby punch to be held between thumb and forefinger much closer to the patient for increased control. This is especially useful when working without an assistant. 50mm long.

001363

Stubby Punch 50mm Long

K Wire Bender

Useful for completing/squaring off the osteotomy, this saw comes complete with five, fine chrome plated blades. Blade length is adjustable from 40mm to 100mm. Handle length130mm. Blade length 155mm.

001000

Adjustable Bone Saw With 5 Fine Blades Spare Fine Blades Pack of 5 Chrome Plated

001001-A

Used to bend K and A wires prior to rotation and seating onto the bone. This instrument is designed to slip over the wire concentrating all the bending forces at the pin/bone interface.The instrument is double ended, the small end is for 0.9mm and 1.1mm wires, the large end is for 1.4mm, 1.6mm and 2.0mm wires.

001000SS-A Adjustable Saw Blade Single Sterile 001002 Coarse Stainless Blade 140mm Long

Patella Saw

001362

Kirschner and Arthrodesis Wire Bender 140mm Long

Offset Wire Bender

A robust design for the accurate and reliable creation of bends close to the bone surface.The three cannulations (1.1mm, 1.6mm and 2.0 mm) cater for the full range of our arthrodesis wires.The short length of each cannulation makes these easy to clean.

With standard sawblade including 1.5mm Allen Wrench.

LEI23100590 Patella Saw LEI23100520 Patella Saw Replacement Blade LEI23100521 Patella Saw Allen Wrench

001373

Offset Wire Bender

16