MaestroDMX

Network The Network page allows users to manage both wireless and hardwired network settings and offers the flexibility to customize the Maestro's hostname. Note: Please be aware that modifying Network and Hostname settings may require a few minutes, during which you may experience a temporary disconnection from the web app. Network Interfaces The network interface displays settings for both Wired Ethernet and Wi-Fi connections. Please note that the wireless network interface will only appear if you are in the "Connect to an Existing Wi-Fi Network" mode on the Wi-Fi page. Warning: Please note that unexpected behavior may occur if both WiFi and Ethernet are configured with the same subnet ranges . For example both WiFi and Ethernet cannot both have a 10.0.0.XXX IP address. If your wifi network uses 10.0.0.x range, select something different for your ethernet range.

Wired Ethernet The Maestro offers two IP modes for Ethernet connections: Static IP and DHCP.

DHCPMode:

1. Connect an Ethernet cable from the Maestro to a router. 2. Switch the IP Mode to DHCP. 3. Click "Update Network Interfaces."

In DHCP mode, the IP address, subnet mask, and gateway will be automatically assigned. You can access the Maestro web app by entering the generated IP address into your browser. Ensure your device is either wirelessly connected or hardwired to the same network the Maestro is connected to.

Static IP Mode:

1. Switch to Static IP mode. 2. Enter an available IP address.