MaestroDMX

3. Click "Update Network Interfaces."

In Static IP mode, users can manually assign an IP address to the Maestro. By default, the Maestro is set to 10.0.0.200. Users can change the IP address to any available 10.0.0.XXX IP, where XXX can be any value up to 255. Note: Some IP addresses may already be reserved for other devices. When in Static IP mode, connect to the Maestro by attaching an Ethernet cable from the Maestro to a personal device. Ensure you have properly configured the ethernet settings on your device. Access the web app by typing your chosen IP address into the browser. WiFi For wireless connections, MaestroDMX offers two IP modes: Static IP and DHCP. Before configuring, ensure you switch to "Connect to an Existing Network" mode in the Wi-Fi settings page.

NOTE : The WiFi interface will only show up if MaestroDMX is connected to a local network

DHCPMode:

1. In DHCP mode, the Maestro is automatically assigned an IP address, subnet mask, and gateway. 2. Devices on the same network as the Maestro can connect to the web app by entering the assigned IP address into the browser.

Static IP Mode:

1. Switch to Static IP mode. 2. Enter a static IP address within a valid range of your network, ensuring it doesn't conflict with other devices. 3. Enter a subnet mask associated with your network. 4. Provide the gateway IP of your router. 5. Devices on the same network as the Maestro can connect to the web app by typing the manually set IP address into the browser.

Note: In addition to configured IP addresses, the web app can always be accessed by typing http://yourHostname.local into the browser.