RCF RDNet Control 2

RDNet 4.0 User Manual Rev. A

Connecting the Control 8 with a fixed IP Address:

1 - Set the computer network IP address (in the same subnet). Pro ceed as follows. (This example refers to Windows 7 Professional, other releases may have windows with different looks):

Open the network settings, right-click the network board icon and select to display its respective menu.

2 - Select and then click . In some particular cases, it may be necessary to select the

3 - Select and then, in the IP address, only type the first three numbers of the IP address (highlighted in green in the figure). Now type the fourth and last number of the IP address, which needs to be different for every device connected to the network. The IP address fourth number can be in the range 1 to 254 (in this example it is 100), except the value 5 (that cannot be used), as it is the one assigned to the CONTROL 8.

Set the same Subnet mask value of the CONTROL 8.

Click OK

16