RCF RDNet Control 2

RDNet 4.0 User Manual Rev. A

6.8

SEND, SYNCHRONIZE AND OBJ STATUS RETRIEVE COMMANDS

When in Online plus Sound Check mode, all object changes take immediate effect, providing complete synchronicity between RDNet software and the monitored system. When in Online plus Concert , some restrictions may be present: parameters can be edited by the user but defer sending changes to the corresponding physical device. For this reason, it is possible that synchronization between RDNet objects and physical devices is lost, until all commands are sent. < Send> and < Synchronize> are useful to bring the system into a state of complete consistency (matching data). < Send> acts on the selected object, < Synchronize> acts on all workspace objects.

The exclamation mark '!' indicates no synchronization between an object and its respective device.

In the →< Setting> menu, it is possible to automate the synchronization between workspace object and devices by checking the ' Auto Synchronize Gain, Eq and Delay on Startup ' option.

For instance, assume the Online-Concert mode (with default settings, as described in the previous chapter). Only one device is edited and its PEQ filter needs to be inserted. Since the ' Live EQ ' (Settings) is disabled, the software accepts the change, but this is not sent to the device.

After enabling one filter, the exclamation mark will appear on the object, because the change has been accepted, but the command has not been sent. Click < Send > to send all changes to the device for a complete synchronization.

works in the same way but applies to all workspace objects.

39