RCF RDNet Control 2

RDNet 4.0 User Manual Rev. A

5.

POLARITY

Click the POLARITY button to invert the signal polarity of its respective output. Click it again to disable it and restore normal polarity.

6.

PEQ (2-BAND PARAMETRIC EQUALIZER)

Click it to open the 2-band parametric equalizer window of its respective output. See the next manual section 12.5 2-BAND PARAMETRIC EQUALIZER .

7.

HI-PASS FILTER

Click on the up/down arrows to increase/decrease the hi-pass filter cutoff frequency of its respective output (note: it is also possible to directly insert its value by using the computer numeric keyboard after clicking the number).

8.

SPEAKER PRESET

Click it to open a drop-down menu to selects the speaker preset (suitable for the used speakers) of its respective output. The default ALL FLAT option: no equalization applied.

9.

Vu meter

LED bar indicating the current signal level of its respective output.

10. SUB/OUT

The two buttons OUT and SUB are mutually exclusive. If SUB is selected, the OUT / SUB rear panel outputs are affected by an 80 Hz low-pass filter, useful for connecting active subwoofers. If OUT is selected, the low-pass filter is not inserted.

11. BUS GAIN

Gain level adjustment of its respective BUS channel.

12. BUS FLAT

Click the FLAT button to toggle the FLAT EQ (no equalization) of its respective BUS channel.

When lit: FLAT EQ is enabled.

82