RCF RDNet Control 2

RDNet 4.0 User Manual Rev. A

12.5

2-BAND PARAMETRIC EQUALIZER

Click PEQ (in the OUTPUTS window) to open the 2-band PEQ settings of the respective audio output.

It is possible to set two independent parametric equalizers. Each PEQ can be adjusted either graphically by dragging its little circle (1, 2, the current selection is shown in cyan) or clicking the up/down arrows or in an analytical way (by directly inserting the values in the cells with the numeric keyboard). The overall equalization is shown as a red line, the intervention of the selected PEQ as a cyan line, the intervention of the other PEQ (that is not selected) as a white line. Type : parametric equalizer (PEQ) that allows to adjust the level at the center frequency and specify the Q factor (the adjusted level can be widened or narrowed).

Q : Q-factor setting.

Gain (dB) : filter gain setting.

Freq (Hz) : central frequency setting.

File Commands: - SAVE : it saves to PC the current equalization as .rde file. - LOAD : it loads from PC an equalization previously saved as .rde file.

Eq. Options: - PHASE PLOT : if selected, the phase plot is graphically shown (yellow line).

83