eurolite DMX Move Control 512 Pro

Programming

8.4 Inserting Steps It is possible to add additional steps to chases or insert steps at any position. If the SPEED LED lights, you can scroll through the individual steps with the encoder wheels.

2

5

5

1 2

5

Activate the programming mode.

To insert a step between two steps press the MENU/ESC button (control LED lights). Then select the step after which a new step is to be inserted. Create the desired scene or call a scene previously memorized and press the REC button to memorize the revised chase. Repeat the steps 4 or 5 to add or insert further steps. To delete a step select it with one of the encoder wheels. Then press the DEL button. ● To confirm the deleting procedure, all LEDs of the controller flash three time.

Press the CHASE button (button lights).

3 Select the chase to be extended with one of the number buttons at the lower right corner. ● The LED of the number button lights and the display indicates the number and steps of the chase. ● If necessary, use the PAGE button to switch between the memory banks 1-15 (LED A lights) and 16-30 (LED B lights). 4 You can now add an additional step to the chase. Simply create a scene or call a scene previously memorized. Shortly press the REC button to memorize the revised chase. ● To confirm the memory procedure, all LEDs of the controller flash three times and the display increases the number and steps by one step.

6

7

54

www.eurolite.de