eurolite DMX Move Control 512 Pro

Programming

8.3 Programming Chases For programming chases, 30 additional memory banks for sequences of up to 485 steps are available. Previously memorized scenes may also be compiled to a chase in any desired order. Chases may run automatically, manually, or sound-controlled.

2

1 2

6 7

Activate the programming mode.

Repeat the steps 2 to 4 to memorize the next step.

Press the CHASE button (button lights).

To delete a chase keep pressing the DEL button and select the chase to be deleted with the number buttons . ● The LEDs of the memory banks containing data light. ● If necessary, use the PAGE button to switch between the memory banks 1-15 (LED A lights) and 16-30 (LED B lights). ● To confirm the deleting procedure, all LEDs of the controller flash three times.

3

Select the desired memory bank with one of the number buttons at the lower right corner. ● If the memory bank does not contain data, the display indicates e.g. “Chase01 Step000“. Otherwise the display indicates the number of steps, e.g. “Chase04 Step010“. ● If necessary, use the PAGE button to switch between the memory banks 1-15 (LED A lights) and 16-30 (LED B lights). 4 Adjust the first scene with the motor faders, the encoder wheels and the effect generator as described before. Press the REC button to memorize the step. ● To confirm the memory procedure, all LEDs of the controller flash three times. ● The indication “Step001" changes to “Step002“ and you can adjust and memorize the next step. 5

53

www.eurolite.de