RCF RDNet Control 2

RDNet 4.0 User Manual Rev. A

7. ARRAY SETTING

This chapter is about all advanced functions that are useful to control a lot of devices in a simple and intuitive way. For a complete understanding of this manual section, it is necessary to know the basic functionality (previously described in chapters 3 and 4).

7.1

PROPERTIES WINDOW

The Properties window (select either < Tools> → < Properties> in the toolbar) allows all object presets to be selected in a simple way. For instance, to set both cluster size and HF correction of an entire speaker array, it is possible to open the < Properties> window after selecting all objects:

The < Properties> window is not the same for all devices. For instance, the HDL30-A has a first section about the FIRPhase settings. The second section regards the high frequency correction, showing presets of both top and bottom speakers (HDL30A has 15 available presets for HF correction). A second section allows the 'Cluster Size' to be set (the same for all speakers). In the specific case of the line arrays, when selecting all cluster objects, all changes are progressive in order to maintain the presets scalability (among objects) but still keeping the possibility to edit (globally) to get customized corrections according to the needs of the sound engineer. NOTE: the simultaneous selection of different objects restricts the available controls only to those common (among all selected devices).

41